Mavic H20 Basecoat Spray Can

Mavic H20 Basecoat Spray Can

$38.99 CAD
Description

Mavic's Custom 1K H20 Base coat spray can be made up to match any automotive paint code you provide. High quality water based base coat will give you the best color match and great coverage. Mavic basecoat requires a clear coat to be applied over top for gloss and protection from UV.  Click HERE to see our selection of clear coats

Need to blend? Order our base coat blender here

Note: Because we make these spray cans custom for you, we can not refund or exchange this product once it has been ordered and made.

Note: If your paint code is a tri-stage (ANY PEARL WHITE COLOR), you will need to order two cans to get these colors. One is the base color, and the second will be your midcoat color.

Note: Not all older OEM colors or motorcycle colors will be available, also tri-stage colors will require two aerosol cans to create the color. Mavic H20 base coat will provide a blend-able match, we cannot guarantee a perfect match due to manufactures color variations from the factory. 

Need for a custom color? Click our contact page and tell us what you're looking for!

Starting with original OE finishes or over recommended undercoats on new parts. Any plastics or bare metals must be primed before applying basecoat.

In all cases, wash all surfaces to be painted with soap and water. Final clean with an appropriate waterborne cleaner. Ensure that the substrate is thoroughly cleaned and dried before starting repair.

Apply H20 Basecoat after sanding with European P800-P1200 / US 500-600 grade paper or dry sand with European P600-800 / US 500-600 grade paper.

Wash off residue and dry thoroughly before re-cleaning with appropriate waterborne substrate cleaner. The use of a tack rag is recommended.

Flash Off

Between Coats: 5 - 10 minutes with air dryers to achieve a matt finish

Note: Temperature, humidity, air movement and film build affect dry times. The best results are achieved with increased temperature and air movement with minimal film builds.

Drying Times

Dust-Free Each coat approximately 4 - 6 minutes 70°F (21°C)

Dry to Handle Approximately 15 - 20 minutes 70°F (21°C)

Dry to De-Nib: Approximately 30 - 45 minutes 70°F (21°C)

Tape Time 30 minutes - 1 Hour 70°F (21°C)

Dry to Clear 15 minutes - 24 hours        Minimum temp  70°F (21°C)

 After 24 hours paint must be lightly sanded, and an addition coat applied prior to clear coat.

 

Reviews

Customer Reviews

Based on 3 reviews Write a review

Related Products

BACK TO TOP